At Young's Equipment it's all about providing you with the optimal tools you need for your farm, providing added value and finding the best solutions for you and your Equipment. That's why we would like to introduce two essential products for your harvesting operation to you:

Take Flexdraper Performance over the Top with MacDon Contour Buddy & Turbo Drum

MacDon FD Series FlexDraper® Headers are designed to contour to the ground on rolling terrain for a close even cut. However, when cutting off the ground, the FlexDraper frame is locked into rigid mode. This setting limits the FlexDraper’s ability to contour over rolling terrain. The ContourBuddy™ System solves that by allowing FlexDrapers to be used in Flex mode while cutting off the ground.

Take FlexDraper® Performance Over the Top! The ContourBuddy™ Performance Option is a simple mechanical system allowing the operator to run their FlexDraper unlocked in Flex, and utilize Auto Header Height mode while cutting crops off the ground. To accomplish this, the design uses strategically placed wheels under the FlexDraper for instant response of the Flex/Float system, mirroring the contours of the field while cutting up to 10 inches (250mm) from the ground surface.

The ContourBuddy™ provides operators with a number of performance benefits including:

• Use of flex mode and auto header height while cutting off the ground - adjustable to leave between 4’’ (100mm) and 10’’ (250mm) of stubble*
• Smooth, consistent stubble heights – ideal for reducing erosion, catching winter snow, and setting you up for planting
• Reduced operator input – Set your cut height and go!
• Reduced digging/picking stones
• Eliminates the need for gauge wheels up to 10’’ (250mm) stubble height*

 Call or come in to your favorite Young's location today to ensure you have your ContourBuddy™ for harvest this year!

Turbodrum is a heavy duty, high-capacity, retrofit feed drum for draper headers to replace the existing, standard feeder drum on draper heads. It comes complete with all internal components fully welded and assembled, ready to go. Just pull out your existing feed drum, then slip-in and install a Turbodrum - it’s that easy.

Turbodrum is a complete easy replacement feeder drum that fits Macdon D60 and FD75 headers. If you are reading this then you already know the frustration of slow harvest speeds in bulky crops like canola, and even worse, the blockages and breakdowns caused by the standard feeder drum in these headers. Turbodrum is an instant fix to problems such as slow harvest speeds in bulky crops, and even worse, blockages and breakdowns caused by the standard feed drum. Turbodrum allows you to go faster and get the crop off in less time at less cost. It feeds better and it’s reliable. Fitting the Turbodrum is quicker than fixing your original. Increase performance and efficiency and reduce loss of crop value.

          

KEY FEATURES

• More than double the number of retractable fingers with a far more aggressive pattern. It literally grabs the crop and pulls it through in a constant and steady flow so the load to the rotor/drum can be optimal. This in turn provides for a more steady and improved ground speed with more crop harvested each day and less loss of time over the harvest period;
• A smaller barrel with taller flighting creates a huge gap for pulling through bulky crops: ideal to help eliminate blockages and pluggin;
• Less flighting and more fingers, so the full width of the drum is used;
• Turbodrum’s unique patented paddle flights prevent repeating by eliminating the usual “dead zone” under the drum;
• A large diameter, fully welded crankshaft: extra strength where you need it;
• Infinitely adjustable finger timing to suit any condition for crop flexibility;
• Eliminates the problematic and unnecessary reverse clutch by not blocking;
• Field-fitted, clamp-on retractable finger holders;
• Extends the life of the rest of your expensive machine by reducing shock loading and plugging;
• Easy installation with clear instructions provided;

With prices on the Turbodrum being lower or comparable to OEM feed drums it's a great option to increase the efficiency of your header. The Young's Equipment parts staff have the knowledge on this and all the parts you need for a no-hassle harvest, come in or call today!

Have you ordered your grainbags yet?

Conditions are different than they were in the last few years, and with that the demand for grain bags has increased drastically. Have you secured the necessary grain bags for your operation yet? If your answer to this question is no, then now is the time to talk to our Parts Professionals about it.

We’re offering you two different brands in various sizes to meet your grain storage needs.

Our very own Youngs Equipment grain bags made by Hi Tech provides an unprecedented 9.5mm thickness. Ultimate durability in the most extreme conditions. Available in lengths between 250 and 500 feet.

Ipesa is a tough and durable bag that provides a thickness of no less than 9.3 mil. These bags have been proven even in the most extreme Saskatchewan conditions. Available in lengths between 250 and 400 feet.

Grainbag Online Order Form

Click the button above to submit your grain bag order online. Submitted forms will be sent to the Young's Equipment location of your choice and one of our friendly parts staff will contact you. Please note you can only order one selection of bag per form but if you wish to order a different size or type the form can be submitted multiple times. If you prefer to speak to someone before ordering, or have questions, please contact or visit any one of our stores. Also, please keep in mind, quantities are limited!

BOOM PRIME
Fully Automated with the Touch of a Button

Boom prime prepares each individual nozzle, beginning on the outside of the boom. Nozzles are opened in timed sections to purge any remaining chemicals. Once boom priming is complete in one section, it continues down to the next section on the boom until all sections are complete.

BOOM RECIRCULATION
Reduce Product Settling and Eliminate Waste

Boom recirculation with Pulse Width Modulated (PWM) nozzle technology uses add-on hardware to aid in efficiently cleaning out the boom and plumbing system by circulating liquid from the outside tip of the boom and back to the center section.

FEATURES
Optimize Chemical Use

• Prime a sprayer boom with minimal application of product, eliminating waste and protecting the environment
• Achieve uniform and correct product application by reducing settling of product throughout the machine
• Increase uptime with a simple and efficient boom

Seamless Integration

• Activate boom prime on your machine with a simple software upgrade, included with AIM Command FLEX™ or Hawkeye® (no unlock required)
• No additional rate controller or display required

Phone or visit your favorite Young's Equipment location for more info on this time and cost saving system for your sprayer.

Why Build a Sprayer Trailer?

In recent years, there has been a debate about whether the additional protection provided by synthetic oil is worth the higher price tag. Read on to learn how synthetic oil is different from conventional oil and what benefits this offers you.

Conventional lubricants are made from mineral base oils, which come directly from a natural source, mostly crude petroleum. Making these oils require less refining than synthetic oils which makes the end product less expensive. The downside to this more natural product is that the molecules in the oil are not uniform in size. This can create more friction and waste build up in the oil.

Synthetic oils also begin as crude petroleum but are highly refined to create a uniform molecular structure. This greatly increases lubrication performance providing extended protection in the most extreme conditions, increased fuel economy, and an extended service life.

What are the advantages of Synthetic oil?

Synthetic oils bring 5 main advantages over conventional oils:

• Higher temperature resistance. Synthetic oils can safely handle higher operating temperatures without breaking down. Synthetic oils are thus recommended for the heavy-duty, turbocharged or hard-use applications seen in agricultural equipment.
• Better low temperature performance, making easier cold starts. Synthetics flow freely at extremely low temperatures (-30 °/- 40° C)
• Better engine protection. As oil moves through the engine, some of the additives can be sheared (cut in half) by high-speed engine parts, which thins the oil. Full synthetic motor oils resist shear under heavy loads better than conventional oils. This helps synthetic motor oil maintain its viscosity grade, which offers better engine protection and withstands more extreme engine conditions.
• Lower oil consumption. Synthetic motor oils experience less "boil off" than conventional motor oils. A good synthetic will lose only about 4 % of its weight when run at 400 degrees for six hours, compared to a 30% loss for conventional petroleum based oil. The lower evaporation rate means less oil consumption between changes.
• Cleaner engines. Synthetics don't break down or sludge up as fast as ordinary mineral based oils do. This means that all your equipment won't accumulate sludge in the engine as fast and lubrication efficiency will be maintained.

Come in and talk to our highly knowledgeable parts staff about all your lubricant options!
Thank you for your time and business,
Young's Equipment Parts and Service teams

Hose to Keep You Growing

At Young’s Equipment we are committed to helping you feed the world! That is why we have developed a complete selection of primary and secondary Air Seeder Hose to get your seeds from the tank to the soil where it all begins. Young’s Equipment is your air seeder hose source for all brands including Bourgault® and Vaderstad®/Seedhawk®. We are fully stocked and ready to meet your Air Seeder Hose needs and you can be sure to receive exceptional service at any of our nine locations. Contact one of our Parts Professionals to discuss your air seeder hose requirements today. 

Kanaflex® polyurethane lined primary hose is available in red or black and offers superior flexibility, it is light weight and resistant to abrasion and protected from UV degradation. 

Kanaflex® PVC primary hose has excellent abrasion resistant qualities and UV protection. Available in white or black. 

EVA plastic tubing is available in 3 sizes. 7/8”, 1”, and 1.036”. Our Parts Teams will be happy to assist you in finding the right size for your air seeder.

The field conditions followed by the harsh winter takes a toll on all hoses on your machine, not just the seed and fertilizer runs. Now is the best time to check the hydraulic hoses as well. And once again Youngs Equipment has you covered. Each of our locations is fully stocked and equipped to provide custom made hydraulic hose from 1/4" to 1" double braid that is far superior to OEM hoses. Our wide selection of fittings is ready to meet your needs during pre-seeding maintenance as well as to get you going again when the unexpected occurs. You can count on us!

Being prepared is your specialty. You know as well as anyone that when it is go time the preparations you make now will save you time, frustration, and expense. Does your drill have the same hydraulic hose repeated for each opener? Don’t let a blown opener hose stop you. Keep a few spares on hand and save the extra road trips when you could be in the field.

In addition to air seeder and hydraulic hose, at Youngs Equipment we have hose for many other applications. From heater hose and fuel line to water discharge and vinyl tubing with or without nylon braid. Whatever your hose needs are, we are ready to help keep you growing!

Visit your nearest Young's Equipment today!
Your Young’s Equipment Team

Start the year with a bang at your Young’s Equipment store, with your opportunity to use top of the line lubricants in your equipment and save cold hard cash while doing it. We are proud to be able to introduce the Viscosity Oil line of lubricants to you.

For decades Viscosity Oil has supplied CNH with high end lubricants formulated specifically for CaseIH equipment. Young's Equipment's strong partnership and history with Viscosity Oil means we now have the opportunity to cut out the middle man and get the lifeblood of your machine directly from the supplier. For you as our partner in business that means significant cost savings which we are happy to pass along to you for the same high quality product you know, have always used and trusted. What's more important is that it doesn't matter what colour equipment you run, you’ll be able to use our Viscosity Oil products in every make and model of all agricultural and construction equipment you have on your farm.

But we won’t stop there, we’re constantly working on providing solutions for your farm that make a difference and add additional value you can’t get anywhere else. In 2021 we are working towards on-farm-delivery of bulk lubricants and DEF and hassle-free storage solutions that will save space in your shop and up-to-date ways to communicate your lubricant demand directly to us. Please stay tuned for that and make sure you follow our social media accounts where you will always get the newest information about promotions and all of the different specials we offer all year long.

Next time you stop in for oil, ask our team for Viscosity Oil products and get the best price for top of the line performance lubricants. Our Parts Professionals are looking forward to telling you all about it.

5 Cold Weather Tips

With the harsh temperatures winter in Saskatchewan throws at us, we thought now would be the perfect time to share some cold weather operating tips for your equipment. No matter which Young’s Equipment location you live closest to, you’re blessed with cold and snowy weather that is hard on your machines. The following five tips will help keep your machines running at top performance when the mercury retreats into that little bulb at the bottom of the thermometer.

• Allow time for machines to warm up – Cold weather is hard on everything, including your equipment. Hoses, wires, hydraulics and more can become stressed or even brittle. Be sure to allow enough time for your machines to come up to operating temperature before heavy operation. Batteries need to be kept fully charged and warm. If possible, keep equipment inside; otherwise, park it in an area that is protected from the harsh winter wind.
• Maintenance checks are vital – Regular maintenance helps you minimize your machine’s downtime and increases your operator’s safety. If anything, these checks are more important in the cold weather, even as human nature makes them more likely to be skipped. Consider taking advantage of Young’s Equipment Winter Inspection and Maintenance programs.
• Switch to synthetic hydraulic/transmission oil – With CaseIH Hy-Tran you’re already using the finest hydraulic fluid on the market that enhances your equipment’s brake and clutch capabilities while helping reduce final drive wear, clutch slippage and brake chatter. Hy-Tran Ultraction is designed to work in an ambient temperature range of -30C to +50C. Consider switching to Hy-Tran SSL once the cold hits, this synthetic blend oil provides all the advantages of Hy-Tran you already value, plus it is designed to work optimally all the way down to -40C. Hy-Tran SSL is an all-season oil that does not need to be drained for operation in warm or hot temperatures.

• Prepare for snow operation – First, make sure machine operators are properly dressed for the cold, even if the machine has a cab or some protection from the elements. They should avoid loose clothing that can catch on controls – a very real hazard. Operators should also be properly trained for snow and icy conditions. This can help prevent errors like excessive down pressure, which can cause damage and is hazardous to the operator and others. Flashing lights, warning sirens and other features should all be in operating order to improve visibility. Defrosters should be checked to keep windows and doors clear so the driver’s visibility is not impaired.
• Rest – Schedule breaks for yourself and your team, as the cold weather can drain energy. Tired drivers are extremely dangerous, so ensure everyone is well-rested and capable of full concentration.

In case you have further questions about winter operation, the Winter Inspections program or Hy-Tran SSL, the Parts and Service staff in all our locations will be happy to answer them for you. We are looking forward to hearing from you soon!